Demand Charges Explained: What Australian Businesses Need to Know
A commercial electricity bill may be based on more than the total amount of electricity a business consumes. Under a demand tariff, one period of high grid demand can influence charges across an entire billing period. Understanding when that peak occurred, what caused it and how the tariff applies is an important part of managing commercial electricity costs.
Article Highlights
- Demand charges are based on the highest level of power drawn from the grid during a defined period.
- Electricity consumption is measured in kilowatt-hours (kWh), while demand is generally measured in kilowatts (kW) or kilovolt-amperes (kVA).
- A single maximum demand interval may establish the demand charge for an entire billing period.
- Demand-measurement periods and charging methods vary between electricity tariffs.
- Electricity bills and interval data can be used to identify when maximum demand occurred and what may have contributed to it.
What Is a Demand Charge?
A demand charge is a component of an electricity tariff based on the maximum amount of power a site draws from the grid during a specified measurement period.
Electricity networks must maintain sufficient capacity to meet the highest level of demand placed on them, even if that level is only reached for a relatively short time. Demand tariffs are designed to reflect the network capacity required to supply a site during these periods.
Demand charges are separate from the usage charges applied to total electricity consumption.
Depending on the site’s tariff and electricity contract, a commercial electricity bill may include:
- A supply charge for maintaining the electricity connection
- Usage charges based on electricity consumed
- Demand charges based on maximum demand
- Metering and service charges
- Applicable network, market and environmental charges
Not every business is billed under a demand tariff. The tariff structure depends on factors including the retailer, distribution network, meter configuration, electricity consumption and connection classification.
Consumption vs Demand: What Is the Difference?
Electricity consumption and electrical demand measure different aspects of a site’s energy use.
| Measure | What It Means | Unit | How It Affects the Bill | Example |
|---|---|---|---|---|
| Electricity consumption | The total amount of electrical energy used over a period. | kWh | Used to calculate usage charges by multiplying total consumption by the applicable rate per kWh. | A 10 kW machine operating for two hours consumes 20 kWh. |
| Electrical demand | The rate at which a site draws power from the grid during a measurement interval. | kW | May be used to calculate demand charges based on the site’s highest qualifying demand interval. | Several high-powered systems operating together can create a higher maximum demand without materially changing total monthly consumption. |
| Apparent power | The combination of real power and the additional power associated with the electrical characteristics of equipment. | kVA | Used for some commercial demand tariffs. Poor power factor may increase chargeable kVA demand. | Motors, pumps, refrigeration systems and compressors can affect power factor and kVA demand. |
Electricity Consumption in kWh
Electricity consumption is measured in kilowatt-hours. It represents the total amount of electrical energy used over time.
For example, operating a 10 kW machine continuously for two hours would consume:
- 10 kW × 2 hours = 20 kWh
The usage component of an electricity bill is generally calculated by multiplying the amount of electricity consumed by the applicable rate per kilowatt-hour.
Reducing operating hours or improving equipment efficiency can lower total electricity consumption. However, these measures may not reduce demand charges if the site’s maximum grid demand remains unchanged.
Electrical Demand in kW
Demand measures how quickly electricity is drawn from the grid during a particular period.
Consider two businesses that each consume 500 kWh during a working day.
The first business uses electricity at a relatively consistent rate across its operating hours. The second operates several high-powered systems at the same time, creating a much higher short-duration peak.
Although both businesses consume the same amount of electricity, the second business may record a higher maximum demand and receive a higher demand charge.
Electricity costs can therefore be influenced by both:
- How much electricity the business consumes
- How concentrated that consumption is at particular times
Demand Measured in kVA
Some commercial demand tariffs are measured in kilovolt-amperes rather than kilowatts.
Kilowatts measure real power used to perform productive work, such as running machinery, lighting, heating or cooling.
Kilovolt-amperes measure apparent power, which includes real power and the additional power associated with the electrical characteristics of equipment.
The relationship between kW and kVA is affected by the site’s power factor. Motors, pumps, refrigeration systems, air compressors and other inductive loads can contribute to a lower power factor.
Where a tariff is measured in kVA, poor power factor may increase chargeable demand even if the site’s real power requirement in kW remains unchanged.
A business should confirm whether its demand is billed in kW or kVA before assessing the cause of the charge.

Demand Charges Explained: What Australian Businesses Need to Know
How Maximum Demand Is Measured
Commercial sites with interval meters have their electricity use recorded in defined time intervals. Australian Government guidance indicates that interval data may provide electricity-use information in 15-, 30- or 60-minute increments.
The measurement interval that applies to an individual business depends on its meter, electricity network and tariff.
Demand Measurement Intervals
Demand is generally calculated as the average rate of grid electricity use during the applicable interval.
For a 30-minute measurement interval, the calculation may be expressed as:
Electricity consumed during the interval ÷ 0.5 hours = average demand in kW
If a site draws 50 kWh from the grid during a 30-minute interval:
- 50 kWh ÷ 0.5 hours = 100 kW
The recorded demand for that interval would be 100 kW.
This is different from an instantaneous spike lasting only a few seconds. Equipment or site activity must contribute enough electricity consumption during the measurement interval to increase the average demand recorded by the meter.
Several high-powered systems operating together for a significant portion of an interval can establish a new maximum.
Chargeable Maximum Demand
Chargeable maximum demand is the demand value used to calculate the demand component of the electricity bill.
The highest demand recorded by the meter is not always the same as the chargeable demand shown on the bill. Minimum billing demand, contracted capacity, defined charging windows or historical demand provisions may affect the calculation.
Example Demand-Charge Calculation
A simplified demand charge may be calculated using:
Chargeable demand × demand rate × number of chargeable days
Consider a business with:
- Chargeable maximum demand of 100 kW
- Demand rate of $0.30 per kW per day
- A 30-day billing period
The demand charge would be:
100 kW × $0.30 × 30 days = $900
If the business recorded a chargeable maximum demand of 130 kW under the same conditions:
130 kW × $0.30 × 30 days = $1,170
The additional 30 kW would increase the demand charge by $270 for that billing period.
This is an illustrative example only. Actual tariffs may use kW or kVA, monthly rates, seasonal rates, separate demand windows or historical maximum-demand calculations.
Why a Short Demand Peak Can Affect the Billing Period
Under some tariffs, the highest qualifying interval determines the chargeable demand for the billing period.
Consider a commercial facility that normally operates between 60 kW and 80 kW. On one afternoon, its air-conditioning, production machinery, air compressor, electric water heating and EV chargers operate at the same time.
If the combined loads increase average grid demand to 140 kW during the applicable interval, that value may become the site’s chargeable maximum demand.
The facility may return to its normal operating range immediately afterwards. However, the 140 kW interval may still determine the demand charge for the remainder of that billing period.
Under tariffs that use annual or historical demand, the financial effect may continue beyond the month in which the peak occurred.
Types of Demand Tariffs
Demand tariffs are not structured consistently across every retailer, network area or business classification.
Australian Government guidance notes that demand charges may be based on the highest demand recorded in a month or year, or on maximum demand during defined peak periods.
| Tariff Structure | How Chargeable Demand is Determined | What to Check |
|---|---|---|
| Anytime demand | Based on the highest qualifying demand interval recorded at any time during the billing period. | Whether overnight activity, equipment start-up or EV charging can establish the maximum demand. |
| Peak-period demand | Based on the highest demand recorded during specified peak-demand hours. | The applicable hours, days and exclusions. |
| Seasonal demand | Demand rates or measurement arrangements change during specified seasons. | Whether different rates or charging windows apply during summer, winter or other defined periods. |
| Monthly maximum demand | Based on the maximum qualifying demand recorded during the billing month. | Whether maximum demand resets at the beginning of each billing period. |
| Historical or annual demand | A previous maximum-demand value may influence charges over a longer period. | How long a recorded peak remains relevant and how the historical value is calculated. |
| Minimum demand | Charges cannot fall below a specified minimum demand level. | Whether reducing measured demand below the minimum would produce further savings. |
| Contracted demand | Charges or conditions are based on an agreed site-demand level. | The contracted level and any consequences of exceeding it. |
Anytime Demand
An anytime-demand tariff measures maximum demand regardless of when it occurs.
Under this structure, an early-morning equipment start-up, an afternoon production peak or overnight EV charging could establish the site’s chargeable maximum demand.
Energex provides an example of an anytime-demand tariff based on the highest 30-minute demand period recorded during the month. This is one network example and should not be assumed to apply to every business.
Peak-Period Demand
A peak-period demand tariff only measures chargeable demand during specified hours.
Maximum demand recorded outside the nominated window may not contribute to the peak-demand charge. The relevant days, hours and exclusions depend on the tariff.
Seasonal Demand
Some demand rates or measurement arrangements vary by season. Higher rates may apply during periods when the electricity network is expected to experience greater demand.
A site’s maximum demand may also change seasonally because of heating, cooling, refrigeration or changes in production.
Monthly or Historical Demand
A monthly demand tariff may reset the applicable maximum at the beginning of each billing period.
Other structures may use a maximum recorded over a longer period or apply a historical demand value. A significant peak may therefore influence more than one electricity bill.
Minimum or Contracted Demand
Some tariffs and electricity contracts include a minimum billing demand or contracted demand level.
Under these arrangements, reducing measured demand below the minimum level may not produce a proportional reduction in the charge. Businesses need to understand these conditions before estimating potential savings.
Demand Periods and Peak Usage Rates
Peak energy rates and demand-measurement periods are not necessarily the same.
A site may pay higher usage rates during one period while its maximum demand is measured during another. Businesses should not assume that the peak period shown for energy consumption also defines the demand-charging window.
The tariff must be reviewed to determine:
- When demand is measured
- Which days are included
- Whether seasonal periods apply
- How the chargeable maximum is selected
What Causes Demand Peaks?
A demand peak generally occurs when several electrical loads operate at the same time or when a high-powered process substantially increases grid demand.
Simultaneous Equipment Start-Up
Motors, pumps, compressors and production equipment may draw substantial power when starting. Bringing several systems online at the beginning of a shift can create a concentrated demand event.
Heating, Ventilation and Air-Conditioning
HVAC systems can add significant demand during hot or cold conditions, particularly when operating alongside normal business equipment.
Refrigeration and Cooling
Cold-storage facilities, supermarkets, food manufacturers and hospitality businesses may experience peaks when compressors and cooling systems operate concurrently.
Production Machinery
Manufacturing processes may require several machines, heating systems, extraction systems and material-handling systems to operate together.
Electric Heating
Commercial ovens, furnaces, water heaters and process-heating equipment can create substantial loads during operating cycles.
Pumps and Compressors
Large motors used for pumping, compressed air and hydraulic systems can contribute to maximum demand, particularly when several units operate simultaneously.
EV Charging
Charging multiple vehicles while a facility is operating can add a significant new electrical load. Unmanaged charging may coincide with an existing operational peak.
Equipment Restart
Equipment restarting after maintenance, a shutdown or an electricity interruption can create a higher-than-normal demand event if multiple systems return to operation together.
Operational Changes
New machinery, longer operating hours, increased production or the electrification of existing processes can alter the timing and magnitude of a site’s maximum demand.
Finding Demand Charges on Your Electricity Bill
Demand charges may not always appear under the same description. The following table can be used when reviewing a commercial electricity bill.
| Bill Item | What to Look For | Why It Matters |
|---|---|---|
| Demand description | Maximum demand, peak demand, network demand, capacity charge, kW demand, kVA demand or contracted demand | Identifies whether a demand charge is included on the bill. |
| Demand unit | kW or kVA | Determines whether the charge is based on real power or apparent power. |
| Recorded demand | The maximum or chargeable demand value shown for the billing period | Provides the demand quantity used in the calculation. |
| Demand rate | A rate per kW or kVA, applied daily or monthly | Determines the cost attached to chargeable demand. |
| Charging period | Peak, off-peak, anytime or seasonal demand | Shows when maximum demand may be measured. |
| Number of days | The number of chargeable days in the billing period | May form part of the demand-charge calculation. |
| Tariff code | The network or retail tariff assigned to the site | Allows the business to obtain the detailed tariff rules. |
| Minimum or contracted demand | A specified minimum or agreed demand level | May limit the savings available from reducing measured demand. |
| Historical demand | A previous maximum used in the current calculation | Indicates whether an earlier demand event continues to affect the bill. |
Retail bills do not always provide the complete tariff methodology. If the calculation is unclear, the electricity retailer should be asked to explain the applicable tariff and demand-charging method.
Questions to clarify include:
- Is the site currently on a demand tariff?
- Is demand measured in kW or kVA?
- What measurement interval applies?
- When does the demand-charging window operate?
- Does the demand rate vary by time or season?
- Does chargeable demand reset each month?
- Does historical, minimum or contracted demand apply?
- What was the site’s highest recorded demand during the billing period?
These details are necessary before the business can determine whether the charge reflects current site operations or identify opportunities to manage it.
Why Interval Data Matters
An electricity bill may show the demand value used for billing, but it does not necessarily explain when the peak occurred or what caused it.
Interval data provides a detailed record of electricity use across each day. It can help identify:
- The date and time of maximum demand
- The duration of the demand event
- Whether the peak was isolated or recurring
- Whether it occurred during operating hours
- Which equipment or process may have contributed
- Differences between weekdays and weekends
- Seasonal changes in the site’s load profile
- The effect of newly installed equipment
The Australian Government recommends using interval data to understand a business’s daily and seasonal energy profile.
Interval data is most useful when compared with operational information, including:
- Production schedules
- Shift commencement times
- Equipment start-up sequences
- HVAC operating schedules
- Refrigeration cycles
- EV-charging activity
- Maintenance or shutdown records
This comparison helps distinguish between a recurring operational peak and an isolated event.
What to Do Next
Understanding the tariff and the site’s demand profile provides the foundation for managing demand charges.
A practical assessment should include:
- Reviewing the electricity bill and tariff structure
- Confirming how chargeable demand is calculated
- Obtaining the site’s interval data
- Identifying the time, duration and frequency of demand peaks
- Matching those events with equipment and site operations
- Assessing whether operational changes can reduce simultaneous loads
- Evaluating whether commercial solar or battery storage could reduce grid demand during chargeable periods
Melbourne Energy Group can assess electricity bills, interval data and site operating requirements to identify the factors contributing to maximum demand and evaluate appropriate energy-management options.